Right, help needed please.
Feel I'm going mad as raced my fzr atbthruxton last year and used my wets, now checked yesterday and the rear wheel spacer on brake side is too small and can slide about on spindle when fitted. It's an Rr wheel so not the captive spacers as per sp.
Now feel I'm going mad as I'm sure it fitted last year. Any one any ideas?
Also, anyone have a spare rrvspacer I could buy or borrow? Or, can anyone tell me the length of the spacer on the brake disc side please?
Many thanks
Lee
Rear wheel spacer for Rr
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
leetyack
- Settled in member
- Posts: 28
- Joined: Fri Jul 31, 2009 9:07 pm
- Bike owned: Fzr400rrsp x6
- Location: Swindon
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Rear wheel spacer for Rr
Talk to Kayla about spacers
Might you have used an extra washer on it ?
Might you have used an extra washer on it ?
-
bendy3
- Settled in member
- Posts: 173
- Joined: Thu Jul 10, 2008 5:11 pm
- Bike owned: FZR400RRSP FZR400 HYBRID RRSP
Re: Rear wheel spacer for Rr
The std spacer on an rr wheel normally gets machined down by 2.5mm to fit the rr wheel into a sp, the sp caliper carrier is 2.5mm wider than the rr due to the steel insert it has. Have you swaped anything?