samco hoses

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
wedge
Settled in member
Posts: 122
Joined: Tue Jun 28, 2011 2:55 pm

samco hoses

Post by wedge » Mon Jul 09, 2012 5:47 pm

i know there someone selling samco hoses for the rrsp model on ebay and i know there is an extra hose the rrsp kit because of the oil cooler........i take the two other rad hoses are the same as the standard 3tj rr model???...or does someone else know of a website selling them because i will not have phone reception for couple of days(working up in the hills)but do get the net and i want to oreder them asap..

rockTJ
Settled in member
Posts: 207
Joined: Sat Mar 31, 2012 3:43 pm
Bike owned: GSX650F FZR250x2 RSV RG80
Location: Southend-on-Sea

Re: samco hoses

Post by rockTJ » Tue Jul 10, 2012 1:24 pm

I hope their kit for the RRSP is better than the std 3TJ. On that kit the water pump to rad hose is about 50-70mm too short. I will stick in a complaint to Samco once I get back from holiday. I will have to get a length of 22mm straight silicone to make my own up........ :x

Chris

Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan

Re: samco hoses

Post by Evilchicken0 » Tue Jul 10, 2012 5:56 pm

If you really want samco hoses then it could be better to measure the overall length, get some of their flexible hose and cut your own.

rockTJ
Settled in member
Posts: 207
Joined: Sat Mar 31, 2012 3:43 pm
Bike owned: GSX650F FZR250x2 RSV RG80
Location: Southend-on-Sea

Re: samco hoses

Post by rockTJ » Tue Jul 10, 2012 8:05 pm

The S-shaped hose on the right of the engine is a perfect fit. There is no way you could make a length of straight hose look as 'meant for the job' as the one they supply. The 90 degree corners are too small radius to do neatly.

Chris

Post Reply