660 stroker rods

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Alex.
Settled in member
Posts: 212
Joined: Wed Jul 23, 2008 3:33 pm
Location: Rainham, Kent.

Re: 660 stroker rods

Post by Alex. » Mon Jun 11, 2012 12:40 pm

nynoah wrote:The other thing I was hoping to figure out was if the profile of the fazer flywheel was the same as the FZR 3HE. Because it looks like the same pickup points as the YZF600r.
That's a very good question, especially as I have just taken delivery of a fazer crank and rods!

I think that EC0 has all three cranks in his possession, can you get the measuring stick out Boris?!?

Alex.
Top
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan

Re: 660 stroker rods

Post by Evilchicken0 » Mon Jun 11, 2012 1:40 pm

Image

4JH
FZS
3HE


I think the 3HE is narrower although the picture makes it look the same - I'll be at college tomorrow evening and give it a proper measure then. I'll try and get the 4JH stator off but I think there's a difference it's in the FZR Archives tread.

How many sets of rods do you need ? have a look and find out the cost / weight to ship and I can maybe calc the optimum no of sets ... :geek:
Top
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan

Re: 660 stroker rods

Post by Evilchicken0 » Mon Jun 11, 2012 1:47 pm

And another thing :grin:

The Fazer's red line is 12.5k rpm on the clocks
The 4JH is 13k
The 3HE is 11.5k

The rev ceiling isn't down to the Fazer rods
Top
Post Reply

Return to “Yamaha - General”