CBR400RR exhaust thread

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
PARUS
Senior Member
Reactions:
Posts: 1243
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Re: CBR400RR exhaust thread

Post by PARUS » Mon May 28, 2012 5:28 pm

vr46 wrote:Yep, but what about the system? You can't tell by the poor photo, but the exhaust system is sprung and the rear link pipe is much higher than standard.
BEET titanium based of the color I think.

vr46
Site Supporter
Site Supporter
Reactions:
Posts: 583
Joined: Sun Jun 15, 2008 1:42 pm
Bike owned: All sorts
Location: CUMBRIA
Re: CBR400RR exhaust thread

Post by vr46 » Mon May 28, 2012 5:59 pm

Nope, a Beet system hangs lower. I've found photos of the same exhaust on here :

Image

Image

Edit: It looks like a matched can / system; The end can bolts on perfectly - no surplus edges.
Last edited by vr46 on Mon May 28, 2012 6:31 pm, edited 1 time in total.
Skint Novice F400

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Mon May 28, 2012 6:08 pm

It could be a moriwaki system as they did do full systems with that end can or it could be a yoshimura system as they had balancer pipes too.

When I get home I will post up pics of each so you can compare them

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Mon May 28, 2012 9:04 pm

Ok so the yoshimura system:

Image
Image

But I now dont think it is this

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Mon May 28, 2012 9:06 pm

So I think it is a full moriwaki system like this:

Image
Image
Image

vr46
Site Supporter
Site Supporter
Reactions:
Posts: 583
Joined: Sun Jun 15, 2008 1:42 pm
Bike owned: All sorts
Location: CUMBRIA
Re: CBR400RR exhaust thread

Post by vr46 » Mon May 28, 2012 9:22 pm

Thanks Yakama!

That looks like the one, even the Hanger bracket is the same.
Skint Novice F400

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 2676
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Mon May 28, 2012 9:29 pm

You thinking of buying the system or the bike?

joeya
Settled in member
Reactions:
Posts: 5
Joined: Wed Jun 29, 2011 3:06 pm
Re: CBR400RR exhaust thread

Post by joeya » Wed Jun 27, 2012 7:30 pm

Hey guys, got this system nearly two years but finally getting around to rebuilding the bike.

The ebay ad said "...NC29 Moriwaki Titanium race exhaust", it came in 7 pieces (8 including an additional link pipe made from stainless, not pictured)

Any idea what it is? The reason for the odd colour is thats its just been sand blasted, not sure if it is Titanium but its super light weight.

Image
IMG_1246 by Joe Alner, on Flickr

Image
IMG_1247 by Joe Alner, on Flickr

Image
IMG_1248 by Joe Alner, on Flickr

Cheers!

willpisme
Settled in member
Reactions:
Posts: 161
Joined: Mon Jun 18, 2012 6:51 pm
Bike owned: NC30, R1, CB250RS, FZR400
Location: North Yorkshire UK
Re: CBR400RR exhaust thread

Post by willpisme » Fri Jun 29, 2012 8:42 pm

Hi all just a quick question about the GF racing nc23 exhaust slip on adapter. Does it just fit direct onto the original exhaust flange or do i need to cut off the flange down to the bolt face? If that makes sense!

Sorry if this is a bit obvious but wanted to double check before hacking away!

hawksuspension
Site Supporter
Site Supporter
Reactions:
Posts: 155
Joined: Fri Feb 04, 2011 4:35 pm
Bike owned: 3tjrrsp/NC29/998R/rc30 750 rep
Location: Cornwall/Berkshire
Re: CBR400RR exhaust thread

Post by hawksuspension » Sun Jul 15, 2012 9:24 am

Yakama wrote:Here is my nc29 hrc system:

Image
Image
Image

Blimey!!! so thats a hrc one for deffo then?? Have identical one sat here...was never sure on make :pray:


Post Reply