CBR400RR exhaust thread

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
PARUS
Senior Member
Reactions:
Posts: 1243
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
CBR400RR exhaust thread

Post by PARUS » Thu May 28, 2009 12:12 am

I think this is time to start this topic. BTW VFR's guys already have one..

I'm thinking to buy following, it's lighter. Price is up to 350$ with P&P from Japan.
What you say guys ?

Image

garyboy_palaboy
Familiar Member
Reactions:
Posts: 268
Joined: Sun May 04, 2008 9:43 am
Re: CBR400RR exhaust thread

Post by garyboy_palaboy » Thu May 28, 2009 10:16 am

you dont need that........









...give them to me!!!! :twisted:

greggo
Site Supporter
Site Supporter
Reactions:
Posts: 535
Joined: Wed May 14, 2008 1:08 pm
Re: CBR400RR exhaust thread

Post by greggo » Thu May 28, 2009 12:39 pm

Looks the same as mine Parus, but with a different end can. I'll get a piccie up at the weekend

Will have a dyno read out soon. That exhaust is particularly good if you want to squeeze in a bigger radiator (I use one from a '99 R1 - it's basically flat with no curve) without the worry of the front wheel hitting it under brakes.

domski
Settled in member
Reactions:
Posts: 55
Joined: Sat Aug 09, 2008 4:24 pm
Bike owned: Honda CBR400RR-N Gullarm
Location: Bristol
Re: CBR400RR exhaust thread

Post by domski » Thu May 28, 2009 5:12 pm

I've just bought this 'JMCA Factory Full System' from the USA...

Image

Image

Image

Image

PARUS
Senior Member
Reactions:
Posts: 1243
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Re: CBR400RR exhaust thread

Post by PARUS » Thu May 28, 2009 10:26 pm

Just interesting. Are this heat wrap really work?

domski
Settled in member
Reactions:
Posts: 55
Joined: Sat Aug 09, 2008 4:24 pm
Bike owned: Honda CBR400RR-N Gullarm
Location: Bristol
Re: CBR400RR exhaust thread

Post by domski » Thu May 28, 2009 10:31 pm

I'm not sure it's much use where it is at the moment, but I'm no expert.

I think it would be more effective if it was up on the headers.

Maybe I can do some tests on a dyno - I will let you know the results ;)

tanuki
Moderators
Moderators
Reactions:
Posts: 2807
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: CBR400RR exhaust thread

Post by tanuki » Thu May 28, 2009 11:28 pm

you know JMCA is not a brand but is the japanese equivelent of our British standard, in other words it just means that it meets jap noise regs.

Looks like a quality system though the way the headers sit so close to the engine is what my Beet racing system misses a bit like the HRC system which yours defo isn't but the one Parus says he is thinking about buying could well be.
I'll try to get some pics of the Beet system up soon

greggo
Site Supporter
Site Supporter
Reactions:
Posts: 535
Joined: Wed May 14, 2008 1:08 pm
Re: CBR400RR exhaust thread

Post by greggo » Fri May 29, 2009 12:48 am

Tanuki is right, as far as I know the system Parus is looking at is either an HRC system, or a copy of an HRC system.

Mine looks identical and is made by TSR, although I have a longer endcan.

These systems are relatively good for midrange, handy when racing against VFR's as they don't get a jump in the initial phase off the turn before the in line 4 gets wound up...

domski
Settled in member
Reactions:
Posts: 55
Joined: Sat Aug 09, 2008 4:24 pm
Bike owned: Honda CBR400RR-N Gullarm
Location: Bristol
Re: CBR400RR exhaust thread

Post by domski » Fri May 29, 2009 11:05 pm

tanuki wrote:you know JMCA is not a brand but is the japanese equivelent of our British standard, in other words it just means that it meets jap noise regs.
I didn't know that actually :oops:

The advert said...

* JMCA Factory Full System Race Exhaust *
Factory team race full system, for all NC29 CBR400's. Serial number 00715064. Wish I could tell you more, but all the literature is in Japanese! Was on our track bike for one weekend, and has been sitting on the shelf for the past 15 years. Absolutely excellent condition! No rash, no damage, no rust.

:?:

PARUS
Senior Member
Reactions:
Posts: 1243
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Re: CBR400RR exhaust thread

Post by PARUS » Sun Jul 26, 2009 9:07 am

Just decided little bit refresh topic.

DIC Exhaust System
Image
Image
Image

EX (Endurance) Exhaust System
Image
Image
Image

DAISHIN RACING Exhaust System
Image
Image


Post Reply

Return to “CBR - General”