NC29 Frame Restoration / Clear Coat ????
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- One Hit Wonder
- Reactions:
- Posts: 1
- Joined: Wed Jan 30, 2019 12:21 pm
NC29 Frame Restoration / Clear Coat ????
Hi all !,
started restoring an NC29 as a winter project and i've got some scratches / scuffs on the frame im gonna get rid of. now i know once i start sanding away at the frame im going to remove the factory clear coat. anyone got any ideas on what to use to re seal the ally again ? its a funny one because the back end of the frame has this sort of Matt effect finish so im assuming i need a Matt Clear Coat but cant seam to find any just for bare metal !.
If Anyone has any's ideas i'm all ears !
Thanks !
started restoring an NC29 as a winter project and i've got some scratches / scuffs on the frame im gonna get rid of. now i know once i start sanding away at the frame im going to remove the factory clear coat. anyone got any ideas on what to use to re seal the ally again ? its a funny one because the back end of the frame has this sort of Matt effect finish so im assuming i need a Matt Clear Coat but cant seam to find any just for bare metal !.
If Anyone has any's ideas i'm all ears !
Thanks !
-
- Settled in member
- Reactions:
- Posts: 5
- Joined: Mon Jan 28, 2019 4:04 pm
- Bike owned: CBR400rr-N
Re: NC29 Frame Restoration / Clear Coat ????
You can buy satin or matt clear coat from most refinishing suppliers. The amount of matt effect depends on how much hardener/activator you add to the laquer
- JZH
- Site Supporter
- Reactions:
- Posts: 368
- Joined: Mon Oct 27, 2008 7:02 pm
- Bike owned: RSCBRRVFVFRST
- Location: London, UK/So.Cal., USA
- Contact:
Re: NC29 Frame Restoration / Clear Coat ????
Anyone ever use Nyalic on a frame?
Ciao,
JZH
Ciao,
JZH