Hi Folks,
This is both a warning and a question.
Anyone wanting to overhaul front OE nissins on their NC30, dont use Bits4Bikes. The set they send for this bike is slightly wrong. The big pistons fit just fine... the smaller ones way too big.
So that leads me to my rather obvious next question:
Where can I get some pattern/genuine small front pistons with some sort of immediacy?
Thanks in advance,
Dx4
NC30 Front Brake Caliper Pistons
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
dx400r
- Site Supporter
- Posts: 307
- Joined: Mon Aug 25, 2008 1:41 pm
-
viper_biker
- Moderators
- Posts: 1798
- Joined: Sun Apr 06, 2008 11:25 am
- Bike owned: VFR400RR, CBR1000RR6
- Location: Belfast, Norn Iron
- Contact:
Re: NC30 Front Brake Caliper Pistons
Wemoto is the place. I re-built my rear caliper with their pistons.
http://shop.wemoto.com/index.dyn?oid=25335" onclick="window.open(this.href);return false;
http://shop.wemoto.com/index.dyn?oid=25335" onclick="window.open(this.href);return false;
Ducati 916, not worth a carrott
-
padawan
- Settled in member
- Posts: 142
- Joined: Fri May 02, 2008 5:53 pm
- Bike owned: VFR 400 NC30
- Location: Middlesex, UK
Re: NC30 Front Brake Caliper Pistons
I used this company RD-BITZ you can find them on ebay.
Company Name: RD-BITZ
Contact Email: n.chambers53@ntlworld.com
The chaps name is Nick he can supply all parts for caliper refurbs he supplied me with stainless steel pistons, matching seals and bleed nipple for my rear caliper (NC30) - everything was spot on.
Contact him direct and mention that you're a 400gb member and you should receive a 5% discount. Delivery is quick and he knew the parts so no mistakes, very approachable with questions etc and always replies to emails, obviously I don't know how his prices compare to wemoto.
Company Name: RD-BITZ
Contact Email: n.chambers53@ntlworld.com
The chaps name is Nick he can supply all parts for caliper refurbs he supplied me with stainless steel pistons, matching seals and bleed nipple for my rear caliper (NC30) - everything was spot on.
Contact him direct and mention that you're a 400gb member and you should receive a 5% discount. Delivery is quick and he knew the parts so no mistakes, very approachable with questions etc and always replies to emails, obviously I don't know how his prices compare to wemoto.