Always hear that NC35 forks is too short for NC29. But found following conversion
. Maybe somebody know owners of this.
NC35 fork to NC29
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
NC35 fork to NC29
Hi,
Always hear that NC35 forks is too short for NC29. But found following conversion
.
Maybe somebody know owners of this.
Always hear that NC35 forks is too short for NC29. But found following conversion
. Maybe somebody know owners of this.
-
garyboy_palaboy
- Familiar Member
- Posts: 267
- Joined: Sun May 04, 2008 9:43 am
Re: NC35 fork to NC29
.
i think that the forks of the NC35 will work...my friend of mine told me that they were able to install a NC35 forks to a NC29 with no problems...
.
i think that the forks of the NC35 will work...my friend of mine told me that they were able to install a NC35 forks to a NC29 with no problems...
.
-
chrisja2
- Site Supporter
- Posts: 642
- Joined: Wed Apr 30, 2008 5:44 pm
- Bike owned: nc29 trackbike
- Location: Nottingham
Re: NC35 fork to NC29
The guys who races the bike is Col, ping him an email. Although i know hes a very busy chap!
-
mrdidlydingo
- Site Supporter
- Posts: 135
- Joined: Sun Dec 14, 2008 10:41 pm
- Bike owned: NC29, 30, 35, RDLC, GSXR
Re: NC35 fork to NC29
Parus, the forks do drop the nose a little but that was fine for me the bike handles very similar to previous once you match up the settings on the rear shock, the brakes are far better.
To convert you will need to swap the stem for your CBR one in the bottom yoke and alter the lockstop position otherwise it'll pretty much be a straight line machine !
Other than that its fairly straightforward if its for a road bike you will need to look at re routing some cabling but nothing that can't be easily overcome.
You'll need NC35 Forks, Yokes, Clip ons, calipers, spindle & spacers
To convert you will need to swap the stem for your CBR one in the bottom yoke and alter the lockstop position otherwise it'll pretty much be a straight line machine !
Other than that its fairly straightforward if its for a road bike you will need to look at re routing some cabling but nothing that can't be easily overcome.
You'll need NC35 Forks, Yokes, Clip ons, calipers, spindle & spacers
Last edited by mrdidlydingo on Fri Aug 13, 2010 11:29 am, edited 1 time in total.
-
CMSMJ1
- Moderators
- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC35 fork to NC29
Username on here is Yeurman I believe.chrisja2 wrote:The guys who races the bike is Col, ping him an email. Although i know hes a very busy chap!
Tasty bikes...
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate