Got my engine finally back into the frame again, only thing is i forgot to swap over the sump as the one on the bike has a small crack in it (no oil leaking but best to change it before hand!)
Does anyone know of a way of changing the sump whilst the engine is still in the frame?
I just cant seam to get anything on the rear centre bolt.
NC24 Sump removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
christ044
- Settled in member
- Posts: 114
- Joined: Mon May 12, 2008 7:35 pm
- Bike owned: NC24
- Location: Isle of Wight
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC24 Sump removal
Surely it'll hit the collector box even if you get it un-done?
I have modded the collectorbox on mine by chopping the rear pipes and welding a collar on them with some simple jubille clamps.
Now the rear pipes stay attatched but the collectorbox just slides off allowing a quick whip off of the sump.
With a standard system the only way I know of is to remove the engine to get the exhaust off
I have modded the collectorbox on mine by chopping the rear pipes and welding a collar on them with some simple jubille clamps.
Now the rear pipes stay attatched but the collectorbox just slides off allowing a quick whip off of the sump.
With a standard system the only way I know of is to remove the engine to get the exhaust off
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...