Bolt sizes

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
steve01
Settled in member
Posts: 56
Joined: Thu Feb 26, 2009 4:58 pm

Bolt sizes

Post by steve01 » Mon Apr 13, 2009 8:39 pm

Hi guys need some help with what size bolts to get to replace my chewed up old ones, can someone help me and tell me the size of bolts i require for the engine mounting bolts and also the nuts and studs for the front and rear exhaust ports / manifold.

thanks

Steve
Top
NC35
Settled in member
Posts: 68
Joined: Mon Feb 16, 2009 10:03 pm

Re: Bolt sizes

Post by NC35 » Mon Apr 13, 2009 8:52 pm

The exhaust manifold to cylinder head studs/nuts are M6 standard pitch, length I don't know off the top of my head.

The three studs on the rear manifold to exhaust downpipes are M8 standard. Length?

Engine mounting bolts are M10 x 1.25mm (fine metric), lengths vary between 35 and 65mm long. Note the thread here - NOT M10 standard (1.50mm)
Top
Post Reply

Return to “Honda - Workshop”