NC24 wiring issue
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 4
- Joined: Thu Nov 22, 2018 10:42 pm
NC24 wiring issue
Hi first post I'm rebuilding an NC24 from scratch, so far I've got the engine in and front end on and swing arm, so I've come to the wiring loom and didn't realize that the engine I have is a K so it has the neutral gear sensor/switch with the 5 wires now I'm stumped coz the loom doesn't have any facility for the wires, so I'm guessing I'm going to have to add these to the loom, so getting to the point has anyone done this and could help me out with a wiring diagram of some sort or info on what to do, thanks in advance any help is greatly appreciated
-
- Familiar Member
- Reactions:
- Posts: 313
- Joined: Tue Nov 24, 2020 12:53 pm
- Bike owned: FZR400,600, CBR893
Re: NC24 wiring issue
Can you upload a pic of the sensor and plug?
What is the engine number? This will identify exactly what engine it is.
Is the CDI unit Denso or Mitsubishi? Located next to the battery or under the pillion pad?
What is the engine number? This will identify exactly what engine it is.
Is the CDI unit Denso or Mitsubishi? Located next to the battery or under the pillion pad?
-
- Settled in member
- Reactions:
- Posts: 4
- Joined: Thu Nov 22, 2018 10:42 pm
Re: NC24 wiring issue
[/img]Hi it's an OKI MLO lot.no. 7520
-
- Moderators
- Reactions:
- Posts: 9358
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC24 wiring issue
Did you fix this.
This issue has been covered before.. I can dig out the post with the answer
This issue has been covered before.. I can dig out the post with the answer
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...