NC30 Clutch Springs

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
slug675
Settled in member
Reactions:
Posts: 45
Joined: Mon Oct 19, 2015 9:27 pm
Bike owned: NC30 / 675SE
Location: Wiltshire
NC30 Clutch Springs

Post by slug675 » Sun Oct 23, 2022 11:24 am

Anyone know if there are any identifying marks on the Honda clutch springs? I have Ebc ones in the bike and they're a bit stronger than I'd like. I want to swap out one or two ebc ones for original ones to hopefully make life easier. Cheers.

MadMotoUK
Familiar Member
Reactions:
Posts: 310
Joined: Tue Nov 24, 2020 12:53 pm
Bike owned: FZR400,600, CBR893
Re: NC30 Clutch Springs

Post by MadMotoUK » Sun Oct 23, 2022 12:59 pm

I wouldn't recommend having springs of different tensions, it could lead to uneven wear.

User avatar
CMSMJ1
Moderators
Moderators
Reactions:
Posts: 9806
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: NC30 Clutch Springs

Post by CMSMJ1 » Tue Oct 25, 2022 12:54 pm

slug675 wrote:
Sun Oct 23, 2022 11:24 am
Anyone know if there are any identifying marks on the Honda clutch springs? I have Ebc ones in the bike and they're a bit stronger than I'd like. I want to swap out one or two ebc ones for original ones to hopefully make life easier. Cheers.
A common mod was to add an extra spring - to ensure no slippage of the clutch. Could it be that you might want to lubricate yuor cable and allow an easier action that way?

There are no marks on the OEM springs as I have one in front of me. Standard fitment is 3 springs. You can probably mix and match OEM and EBC if you wish to?
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

slug675
Settled in member
Reactions:
Posts: 45
Joined: Mon Oct 19, 2015 9:27 pm
Bike owned: NC30 / 675SE
Location: Wiltshire
Re: NC30 Clutch Springs

Post by slug675 » Sat Oct 29, 2022 5:59 pm

Thanks for the replies. I remember the old mod of adding an extra spring. I have another set of springs but without any markings the only way to find out how strong they are is to fit them i guess. Cheers.


Post Reply