nc35 tidy up
Posted: Sat May 15, 2021 12:35 pm
just bought a nc35 track bike in need of some TLC.
first thing was check the vin. turns out it's still road registered which is a real bonus.
has a great spec. maxton suspension front and rear. Yamamoto exhaust (I think)
beet full bank rearsets
front subframe are aluminium
adjustable clip ons
plus lots of other goodies.
from the description I assumed the owner didn't realise or appreciate what he had. turned out he knew but didn't care as he had other things on in life.
one collection the owner had said it's as fast as one of these get. apparently has a 414 cosworth piston kit and flowed cylinder heads.
whiped the carbs off and sure enough there heads are ported. will be Interesting to see what she makes on a dyno.
I dont currently have time to do a full restoration so it's just having a good refresh.
new chassis bearings all round.
vapour blast engine cases, swingarm, cam covers etc
majority of the chassis bolts and brackets zinc plated
wheels and lots of other brackets ordered.
time for some upgrades too...
RO aluminium subframe
RO gsxr1000 flywheel
lipo battery
tyga endurance fairing and seat
replacement stock looking radiators.
majority of the work will be completed within a few weeks other than the paintwork, suspension revalve and a few odds and sods.
bikes now sat stripped down was everything been sent away on monday. 1 week turnaround time... or so I've been told!
first thing was check the vin. turns out it's still road registered which is a real bonus.
has a great spec. maxton suspension front and rear. Yamamoto exhaust (I think)
beet full bank rearsets
front subframe are aluminium
adjustable clip ons
plus lots of other goodies.
from the description I assumed the owner didn't realise or appreciate what he had. turned out he knew but didn't care as he had other things on in life.
one collection the owner had said it's as fast as one of these get. apparently has a 414 cosworth piston kit and flowed cylinder heads.
whiped the carbs off and sure enough there heads are ported. will be Interesting to see what she makes on a dyno.
I dont currently have time to do a full restoration so it's just having a good refresh.
new chassis bearings all round.
vapour blast engine cases, swingarm, cam covers etc
majority of the chassis bolts and brackets zinc plated
wheels and lots of other brackets ordered.
time for some upgrades too...
RO aluminium subframe
RO gsxr1000 flywheel
lipo battery
tyga endurance fairing and seat
replacement stock looking radiators.
majority of the work will be completed within a few weeks other than the paintwork, suspension revalve and a few odds and sods.
bikes now sat stripped down was everything been sent away on monday. 1 week turnaround time... or so I've been told!