Seal behind front sprocket nc30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- One Hit Wonder
- Reactions:
- Posts: 1
- Joined: Sun Dec 13, 2020 9:08 pm
Seal behind front sprocket nc30
I am trying to replace the seal behind the front sprocket on my nc30, got the front sprocket off ,but cant seem to figure out how to get the old seal out any tips pleasw
-
- Senior Member
- Reactions:
- Posts: 1910
- Joined: Mon Sep 20, 2010 11:55 pm
- Bike owned: VFR400
- Location: Blue Mountain NSW Australia
Re: Seal behind front sprocket nc30
Not easy without splitting the engine cases. The old seal can be removed with screw driver and hammer, rough but effective. New seal installation is the big issue. There is a ridge on the outer surface of the seal that sits in a groove in the cases. Maybe a press can push the seal home.
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: Seal behind front sprocket nc30
I'd always thought this was a bigger job than it looked - this is the output seal isn't it?
I don't think it goes in form the outside - have a look at the service manual and find out what that says.
And welcome Andy...it's the place to find out the answers
I don't think it goes in form the outside - have a look at the service manual and find out what that says.
And welcome Andy...it's the place to find out the answers
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- Senior Member
- Reactions:
- Posts: 1351
- Joined: Fri Feb 21, 2014 1:31 pm
Re: Seal behind front sprocket nc30
I always thought it was a engine out/split cases