HRC CDI ??

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
parto
Settled in member
Reactions:
Posts: 18
Joined: Mon May 19, 2008 3:48 am
HRC CDI ??

Post by parto » Mon May 19, 2008 3:57 am

I AM LOOKING FOR A HRC OR EQUIVILANT CDI FOR MY NC29

WHERE CAN I GET ONE?
HOW MUCH ARE THEY?
WHAT ADVANTAGES WILL I GET?
WHAT OTHER CHANGES WILL I NEED TO DO?

THE BIKE IS A RACE BIKE WITH A FULL SYSTEM ,JETKIT, AND A HRC AIRBOX PUTTING OUT AROUND 63 HP

ANY HELP WOULD BE APPRECIATED

THANKS

User avatar
Cammo
Site Supporter
Site Supporter
Reactions:
Posts: 5524
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: HRC CDI ??

Post by Cammo » Mon May 19, 2008 6:33 am

The best (read: cheapest) place to get them is probably yahoo japan. You can get them for AUD$250-300 usually.

Plug and play pretty much, I think you need to change 1 wire location around.

There are 2 models that will work (different codes), 1 is for the cb400 the other nc29, I don't think there's any difference but could be wrong.

p.s. There is no equivalent, have heard a few bad reports about the Chinese ebay copies.
"It's just a ride" Bill Hicks

little nick
Settled in member
Reactions:
Posts: 35
Joined: Sat May 03, 2008 9:14 pm
Re: HRC CDI ??

Post by little nick » Mon May 19, 2008 9:36 am

parto wrote:
WHERE CAN I GET ONE?
HOW MUCH ARE THEY?
WHAT ADVANTAGES WILL I GET?
WHAT OTHER CHANGES WILL I NEED TO DO?

THE BIKE IS A RACE BIKE WITH A FULL SYSTEM ,JETKIT, AND A HRC AIRBOX PUTTING OUT AROUND 63 HP
It would go well with a fully preped bike like your one.

The HRC CDI has a different advanced curve and has a higher rev limit.

In theory you need the HRC loom for it to work - or you can move one wire in the CDI plug .

Graeme France sells them.

parto
Settled in member
Reactions:
Posts: 18
Joined: Mon May 19, 2008 3:48 am
Re: HRC CDI ??

Post by parto » Mon May 19, 2008 10:07 am

I am from Australia

Who is Graeme France and does he have a contact email
Thanks

tanuki
Site Supporter
Site Supporter
Reactions:
Posts: 2807
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: HRC CDI ??

Post by tanuki » Mon May 19, 2008 12:18 pm

buying them from the UK is big $$$ wait on yahoo japan I goit mine for £99


Post Reply