NC30 fork strip
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 37
- Joined: Fri Mar 06, 2015 4:03 pm
- Bike owned: Honda SP1, BSA Golden Flash, H
- Location: Haddington, East Lothian
- Contact:
NC30 fork strip
Stripped the forks,stanchions away for rechroming , the Haynes manual says when you start the rebuild ,you insert the damper rod minus its components and fit the Allen bolt into the damper rod and tighten to specified torque, as I didn’t need to replace any of the components on the damper rod, can I just refit it complete as it came out of the fork tubes?
-
- Site Supporter
- Reactions:
- Posts: 159
- Joined: Fri May 02, 2008 7:08 pm
- Bike owned: NC29 Race
- Location: Surrey
- Contact:
Re: NC30 fork strip
I'm not really sure what it is your asking,
I'm assuming you mean when the fork tubes come back from re-chroming?
Basically you need to re install just the damper rod, leave out the spring, washers and spacer, tighten the bolt up at the bottom this then allows you to fill it with oil and set your air gap once you've don't that then you can install the spring, washers and spacer
Hope that helps
I'm assuming you mean when the fork tubes come back from re-chroming?
Basically you need to re install just the damper rod, leave out the spring, washers and spacer, tighten the bolt up at the bottom this then allows you to fill it with oil and set your air gap once you've don't that then you can install the spring, washers and spacer
Hope that helps
-
- Settled in member
- Reactions:
- Posts: 37
- Joined: Fri Mar 06, 2015 4:03 pm
- Bike owned: Honda SP1, BSA Golden Flash, H
- Location: Haddington, East Lothian
- Contact:
Re: NC30 fork strip
Thanks for your answer, told me all I need to know