NC24 where to source replacement master cylinder lines

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Johannes
Settled in member
Reactions:
Posts: 38
Joined: Thu Jul 03, 2014 11:38 am
NC24 where to source replacement master cylinder lines

Post by Johannes » Sat Jan 04, 2020 3:48 pm

I'd like to replace the lines from the front and rear reservoirs to the master cylinders. It seems that both Honda and Pattern parts are no longer available. Has anyone come across this before and solved it?

Thanks.

Faxe400
Settled in member
Reactions:
Posts: 39
Joined: Fri Apr 06, 2018 7:52 am
Bike owned: VFR400RH, VF1000RG
Re: NC24 where to source replacement master cylinder lines

Post by Faxe400 » Mon Jan 06, 2020 8:43 am

For front, I used some rubber fuel line (altough brake fluid is not simmelar to fuel). I had it with fitting diameter available.

Maelstrom
Site Supporter
Site Supporter
Reactions:
Posts: 581
Joined: Tue Aug 16, 2011 3:10 pm
Bike owned: MC22, 3TJ1
Location: Thailand
Contact:
Re: NC24 where to source replacement master cylinder lines

Post by Maelstrom » Tue Jan 14, 2020 11:55 pm

Lots of people using Tygon 2375
Carb seal kits in viton & other parts
https://litetek.co

2manyprjx
Settled in member
Reactions:
Posts: 17
Joined: Sat Dec 27, 2014 8:13 am
Bike owned: RZ350&500,NS400R,NC30,916
Location: USA
Re: NC24 where to source replacement master cylinder lines

Post by 2manyprjx » Sun Feb 16, 2020 6:44 am

This will work for all the CBR's, VFR's, and NSR's that have the remote reservoir on the front master cylinder. Order Honda part number 43512-MN5-000. It's a rear brake reservoir hose for a GL1500. After pulling off the rubber sleeve, you'll have enough hose to do three fronts. Use a razor blade to cut it to prevent fraying the woven fabric cover. It's the exact hose the bikes came with from the factory.


Post Reply