Bottom yoke attachments on NC24

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
michaelpoplett
Settled in member
Reactions:
Posts: 3
Joined: Mon Sep 16, 2019 5:50 pm
Bottom yoke attachments on NC24

Post by michaelpoplett » Tue Sep 17, 2019 10:12 am

I changed the fork seals, which is perfectly straight forward, but for the life of me I can't remember how the horn/rubber and steel guard/front brake splitter go back! Presently, I've got the front brake splitter bolted to the bottom yoke, with the horn on the front of that. Where does the rubber and steel cover go? It has to be there somewhere, unless the horn goes somewhere else. A photo of someone's bottom yoke would help a lot. Cheers, Mike michael.poplett@btinternet.com

Suzuki416
Familiar Member
Reactions:
Posts: 298
Joined: Fri Aug 26, 2016 10:17 am
Bike owned: 3 x NC35, 3x NC24, NC29, RC46
Location: London
Re: Bottom yoke attachments on NC24

Post by Suzuki416 » Thu Sep 19, 2019 10:56 pm


michaelpoplett
Settled in member
Reactions:
Posts: 3
Joined: Mon Sep 16, 2019 5:50 pm
Re: Bottom yoke attachments on NC24

Post by michaelpoplett » Mon Sep 30, 2019 4:44 pm

Thanks for this, and these charts are very useful, but none show the bottom yoke attachments as described with the rubber and steel cover! It's strange, and I'm wondering whether it's one of those things the H men did for one production run, and then ditched the idea:-/

Faxe400
Settled in member
Reactions:
Posts: 39
Joined: Fri Apr 06, 2018 7:52 am
Bike owned: VFR400RH, VF1000RG
Re: Bottom yoke attachments on NC24

Post by Faxe400 » Tue Oct 01, 2019 1:01 pm

Hi,

can you please post a picture of your parts? I disassembled my NC24 last year and now I'm putting everything together. One was equipped with two brake lines without splitter. I will use two M6 screws to mount horn and splitter (now I have 3 brake lines) to the bottom stearing stem.

From the above link -> Stem -> Part 13 is used for my horn

Faxe400
Settled in member
Reactions:
Posts: 39
Joined: Fri Apr 06, 2018 7:52 am
Bike owned: VFR400RH, VF1000RG
Re: Bottom yoke attachments on NC24

Post by Faxe400 » Sun Oct 06, 2019 4:25 pm

Here is a Pic from my bike.

Image

Axel

michaelpoplett
Settled in member
Reactions:
Posts: 3
Joined: Mon Sep 16, 2019 5:50 pm
Re: Bottom yoke attachments on NC24

Post by michaelpoplett » Fri Oct 18, 2019 7:06 pm

Thank you for all the suggestions, the parts diagram, and general help. The rubber and steel guard actually bolts to the underside of the bottom yoke with a single hex bolt, and it seems to protect the aperture to the underside of the bottom yoke where you would insert the pin on a front wheel stand. MJP


Post Reply