NC30 side stand issue

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
wingy1962
Settled in member
Reactions:
Posts: 15
Joined: Sat Oct 27, 2018 11:48 pm
NC30 side stand issue

Post by wingy1962 » Wed Jul 03, 2019 8:37 pm

Team

When I pul my side stand down it doesn't extend all the way forward, any ideas.

I'll take it off this weekend and take a look.

Thanks and regards,
Tony

Travis
Settled in member
Reactions:
Posts: 55
Joined: Mon Jan 28, 2019 8:22 am
Re: NC30 side stand issue

Post by Travis » Tue Jul 23, 2019 1:21 pm

I had to cut my faring back to accommodate the side stand on the VFR, perhaps check its not fouling the body work.

Foxy400
Regular Member
Reactions:
Posts: 793
Joined: Mon Sep 02, 2013 7:31 pm
Bike owned: NC35 NC29 Bonneville CBR600F4i
Location: Cheshire
Re: NC30 side stand issue

Post by Foxy400 » Thu Aug 01, 2019 4:43 pm

What had happened to your side stand that made it necessary to cut the fairing? Is your fairing original or aftermarket?

Travis
Settled in member
Reactions:
Posts: 55
Joined: Mon Jan 28, 2019 8:22 am
Re: NC30 side stand issue

Post by Travis » Wed Aug 07, 2019 2:06 pm

Foxy400 wrote:
Thu Aug 01, 2019 4:43 pm
What had happened to your side stand that made it necessary to cut the fairing? Is your fairing original or aftermarket?
aftermarket from China, little detailing required to make it fit nice.

Vincent
Settled in member
Reactions:
Posts: 76
Joined: Sun Jul 06, 2014 12:49 am
Bike owned: '89 NC30 T1, '92 NC30 T8
Location: New Zealand
Re: NC30 side stand issue

Post by Vincent » Thu Aug 08, 2019 3:46 am

Mine was fouling a little bit, and it turned out that the bottom left fairing stay was bent slightly out of shape.


Post Reply