Vfr400r nc24 1988 cuts out at high revs when riding
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 14
- Joined: Wed Dec 26, 2018 8:27 pm
Vfr400r nc24 1988 cuts out at high revs when riding
Hi guys been riding my vfr the past couple of days it's been fine all day in the sun but comes to night time and I have the lights on as I'm throttling it on a straight or round a bend it just completely dies ramdomly, won't bump start if u use the clutch n drop it though the gears as still rolling, but the ignition is still on and the lights u have to turn it of wait few seconds and it fires up and rides fine again, any ideas what it could be ???I was thinking reg, rec.need it sorted it dodgy when I'm giving it some and the bike completely dies haha
-
- Senior Member
- Reactions:
- Posts: 1910
- Joined: Mon Sep 20, 2010 11:55 pm
- Bike owned: VFR400
- Location: Blue Mountain NSW Australia
Re: Vfr400r nc24 1988 cuts out at high revs when riding
Measure the battery voltage with engine at 3000rpm with headlight high beam on, should measure more than 13.5 volts.
-
- Senior Member
- Reactions:
- Posts: 1910
- Joined: Mon Sep 20, 2010 11:55 pm
- Bike owned: VFR400
- Location: Blue Mountain NSW Australia
Re: Vfr400r nc24 1988 cuts out at high revs when riding
Measure the battery voltage with engine at 3000rpm with headlight high beam on, should measure more than 13.5 volts.