VFR400 / NC21 Carb synch
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
VFR400Ryder
- Settled in member
- Reactions:
- Posts: 2
- Joined: Mon Apr 01, 2019 9:36 am
VFR400 / NC21 Carb synch
Hi, In the process of rebuilding an NC21 VFR. I have the carbs off to clean them and check linkages etc.
Mine have been set up so that 2 of the carbs open earlier than the others. Is this right? It doesn't make sense to me! I can't see how they can be synchronized this way.
Although the bike ran when I bought it, it was pretty rough and very difficult to start.
Any thoughts?
Mine have been set up so that 2 of the carbs open earlier than the others. Is this right? It doesn't make sense to me! I can't see how they can be synchronized this way.
Although the bike ran when I bought it, it was pretty rough and very difficult to start.
Any thoughts?
-
Suzuki416
- Familiar Member
- Reactions:
- Posts: 298
- Joined: Fri Aug 26, 2016 10:17 am
- Bike owned: 3 x NC35, 3x NC24, NC29, RC46
- Location: London
Re: VFR400 / NC21 Carb synch
I'd suggest that who ever worked on them didn't have a clue...
-
VFR400Ryder
- Settled in member
- Reactions:
- Posts: 2
- Joined: Mon Apr 01, 2019 9:36 am
Re: VFR400 / NC21 Carb synch
Agreed!
Now found some springs missing from the linkages. Hopefully putting some in will get the carbs all opening in unison....
Now found some springs missing from the linkages. Hopefully putting some in will get the carbs all opening in unison....