NC30 Remove rear Lower engine mounting bolt
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 2
- Joined: Sun Feb 04, 2018 11:51 am
NC30 Remove rear Lower engine mounting bolt
Hi All
I'm troubling removing the rear lower engine mounting bolt and hope you can help me out, solving the problem.
I have removed the nut on the lefthand side and the castle nut on the righthand side.
Can I hammer it out from the left side of the bike or is it screwed into the frame? (It is not clear to me, via the manual).
Thnaks in advance!
Pictures:
https://ibb.co/ct31GBD
https://ibb.co/0XJmhzF
https://ibb.co/CQb3mXy
/Esben
I'm troubling removing the rear lower engine mounting bolt and hope you can help me out, solving the problem.
I have removed the nut on the lefthand side and the castle nut on the righthand side.
Can I hammer it out from the left side of the bike or is it screwed into the frame? (It is not clear to me, via the manual).
Thnaks in advance!
Pictures:
https://ibb.co/ct31GBD
https://ibb.co/0XJmhzF
https://ibb.co/CQb3mXy
/Esben
-
- Site Supporter
- Reactions:
- Posts: 905
- Joined: Tue Feb 14, 2012 9:12 pm
- Bike owned: NC30 x4, VTR1000 Firestorm
- Location: Co Down
Re: NC30 Remove rear Lower engine mounting bolt
Put the nut back on a few threads and hit it a smack with the hammer to loosen it up. Hitting the pin directly will damage the threads
- Tim400GB
- Site Supporter
- Reactions:
- Posts: 1168
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: NC30 Remove rear Lower engine mounting bolt
Get some penetrating fluid too, dont want to be doom and gloom but Ive helped a friend cut one of those out before