Rebuild options
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- One Hit Wonder
- Reactions:
- Posts: 1
- Joined: Thu Aug 27, 2015 11:05 pm
Rebuild options
Evening guys. Excuse the new forum name. I can’t get into the old one!
A compression test on my NC35 shows one of the cylinders is way down. I suspect the rings/bore as a wet test showed a jump in pressure temporarily.
So having searched these forums it seems there are options for a top end rebuild. What pistons do you recommend/what is available? I’ve seen people love the Cosworth units from Mike Norman, but it looks like the only ones he has left require the HRC replica rods too. Unfortunately I just don’t have that kind of money.
So whatbare the options?
Cheers
A compression test on my NC35 shows one of the cylinders is way down. I suspect the rings/bore as a wet test showed a jump in pressure temporarily.
So having searched these forums it seems there are options for a top end rebuild. What pistons do you recommend/what is available? I’ve seen people love the Cosworth units from Mike Norman, but it looks like the only ones he has left require the HRC replica rods too. Unfortunately I just don’t have that kind of money.
So whatbare the options?
Cheers
-
- Senior Member
- Reactions:
- Posts: 1910
- Joined: Mon Sep 20, 2010 11:55 pm
- Bike owned: VFR400
- Location: Blue Mountain NSW Australia
Re: Rebuild options
A hone and new rings?