Carb to intake insulators / cyclinder head cover gaskets

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
NICKNewt
Settled in member
Reactions:
Posts: 4
Joined: Thu Jul 12, 2018 10:29 pm
Carb to intake insulators / cyclinder head cover gaskets

Post by NICKNewt » Thu Aug 02, 2018 1:00 pm

Hi All,

Two quick questions

1) are the carb to inlet rubbers / insulators the same for NC21, NC24 and NC30?
2) where are you guys sourcing cyclinder head cover (cam cover) gaskets? David Silver / CMS / wemoto none of them have them in stock

Thanks

Neosophist
Moderators
Moderators
Reactions:
Posts: 9358
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Carb to intake insulators / cyclinder head cover gaskets

Post by Neosophist » Fri Aug 03, 2018 11:02 am

nc24 / nc30 carb rubbers should be either the same part of cross compatible.

The nc21 might fit im not sure, the carbs were 30mm not 32mm but im sure its just the inner bore that was different not the outer bore so might well fit too.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...


Post Reply