Levers Cross Reference ? NC21

FastMart · Post by **FastMart** » Sat Apr 02, 2016 7:22 pm

Hello,

Does anybody have any details of clutch/brake levers that are the same on other Honda machines ?

I am interested in clutch and brake levers for the NC21.

Any other bikes that use the same lever designs, taking into account that the NC21 lever is for an hydraulic setup not cable.

e.g a CBR600 or VFR800, etc.

Cheers

FastMart

Post by **Neosophist** » Sun Apr 03, 2016 3:57 am

my bike had an nc30 adjustable brake lever on it with the stock clutch lever..

what kind of levers are you after? stock or aftermarket?

could always change teh mastercylinders as well if you cant find anything to fit but most of them seem to be interchanable.

the sp1 has hydraulic clutch too, that would be a good place to start i think.

FastMart · Post by **FastMart** » Sun Apr 03, 2016 4:16 pm

Hey Neophist,
Thanks for the reply,
I am after some after market ones that are adjustable and have a better look.
Cheers
FastMart

Post by **Neosophist** » Mon Apr 04, 2016 4:28 am

since its a bit of unknown rather than buy fancy expensive levers you can get chinese cheap ones for pennies, might be worth getting a set of them to cehck the test fit.

FastMart · Post by **FastMart** » Mon Apr 04, 2016 3:25 pm

Yes, that would be the simple option.
thanks again as always.
FastMart

Levers Cross Reference ? NC21

Levers Cross Reference ? NC21

Re: Levers Cross Reference ? NC21

Re: Levers Cross Reference ? NC21

Re: Levers Cross Reference ? NC21

Re: Levers Cross Reference ? NC21