nc29 engine jumping out of second gear

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
chrisja2
Site Supporter
Site Supporter
Reactions:
Posts: 1198
Joined: Wed Apr 30, 2008 5:44 pm
Bike owned: nc29 trackbike
Location: Nottingham
nc29 engine jumping out of second gear

Post by chrisja2 » Fri May 16, 2008 7:41 pm

Ok how hard is it to repair? What is it that needs repairing? How much is it gonna cost?
Cheers in advance you clever people.
Chris. :)

weedossmc
Settled in member
Reactions:
Posts: 21
Joined: Sun May 04, 2008 10:12 am
Location: Glasgow
Re: nc29 engine jumping out of second gear

Post by weedossmc » Fri May 16, 2008 7:55 pm

:shock: hey up, your not alone sixth gear on my bike keeps jumping out of gear. i just bought a low mileage gearbox of ebay along with a new haynes manual. but this is my second time trying this and it was quite tricky the first time. but it was easier than i thought it would be.
or buy the bits and take it to a garage, don,t know how much it will cost? took me a good few hours/days but i,m not a mechanic.
it,s probably either the gear dogs or the slots that the gear dogs mesh into. apparently this is the most common fault with the 400 nc29 gearbox through iffy gear changes.
if your good with your hands, ;) give it a go but remember you,ll need gaskets and other stuff if you try it.
sorry that this was no help what so ever, but hey :P

Dgeoff33
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 1282
Joined: Wed Apr 30, 2008 3:46 pm
Bike owned: RVF400 - ZX636
Location: doncaster
Re: nc29 engine jumping out of second gear

Post by Dgeoff33 » Sat May 17, 2008 2:32 am

I've got a good gear box if you need one :)

leopard_pagan
Senior Member
Reactions:
Posts: 1878
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: nc29 engine jumping out of second gear

Post by leopard_pagan » Mon May 19, 2008 11:07 am

or the gear selector fork.... they bend easy.

davidsimon10
Settled in member
Reactions:
Posts: 32
Joined: Fri May 02, 2008 10:11 am
Re: nc29 engine jumping out of second gear

Post by davidsimon10 » Sun May 25, 2008 11:40 am

hello criss give me a call on 07766525812 and ill give you some advise


Post Reply