Looking for 95' CB400 wiring diagram

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
JamieCB400
Settled in member
Reactions:
Posts: 15
Joined: Tue Sep 08, 2015 6:43 pm
Looking for 95' CB400 wiring diagram

Post by JamieCB400 » Tue Oct 06, 2015 8:47 pm

My bike has a mid rpm range constant misfire which I believe is related to the 180kph restriction.

Fitting the resistor in the speedo made no difference.

The loom looks like it has been messed about with so I was looking for a wiring diagram for the bike.

I managed to get hold of the translated version of the manual but the quality of the wiring diagrams are too low to make out the colours.

Is there a higher quality manual out there or am I out of luck on this one?

Gidanski
Settled in member
Reactions:
Posts: 61
Joined: Tue Oct 30, 2012 10:53 am
Bike owned: 1994 CB400SF, 2008 CBR600RR
Location: Australia
Re: Looking for 95' CB400 wiring diagram

Post by Gidanski » Wed Oct 07, 2015 10:46 am

Should be the Blue with orange trace on the Ignition module. You need to solder a 2k ohm resistor between it and the black with white trace wire , the blue/orange can be cut but the black/white just needs a small part stripped off it. Remember to tape it up well.

JamieCB400
Settled in member
Reactions:
Posts: 15
Joined: Tue Sep 08, 2015 6:43 pm
Re: Looking for 95' CB400 wiring diagram

Post by JamieCB400 » Wed Oct 07, 2015 7:16 pm

Thanks for the reply. I have a Black and White and an Orange with Blue trace (The one that runs to the speedo).

Anyway, I fitted the resistor between those with no difference, although the Black and White wire had already been cut and rejoined with the alarm wired through it.

I tried pulling the resistor for the clocks before changing anything and it made no difference to the misfire.

When riding it feels more like a bad flat spot than it does a misfire. It is only between about 5500 and 7500 rpm.

This post explains it best.
viewtopic.php?f=32&t=12011

mrottopup
One Hit Wonder
Reactions:
Posts: 1
Joined: Thu Mar 21, 2019 5:04 pm
Re: Looking for 95' CB400 wiring diagram

Post by mrottopup » Thu Mar 21, 2019 5:12 pm

Necroing this post as I'm in the same boat


Post Reply