1985 cbr

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
nextsequel
One Hit Wonder
Posts: 1
Joined: Sat Aug 30, 2014 3:54 am

1985 cbr

Post by nextsequel » Sat Aug 30, 2014 4:23 am

Hi ive got a honda 1985 cbr 400 ive just pulled out a spun conrod bearing and was wanting to know if anyone had measurements of a nc23-29 400 rod bearing dimensions to see if they may fit because I cant find any original replacement ones.

I measured the bearing cap of mine where bearing fits and its 3.3cm from end to end and 1.8cm across and 1mm thick roughly the crank still looks good ive given it a polish with a polishing liquid and cloth,It only rattled when revved over 5000rpm besides that its still worth fixing.
Im not overly fussed on machining the crank because I only plan on trail hooning on it with mates every fortnight(got dirt bike tyres for it)they think there dirt bikes can haul a#$ they can ride this thing and really see how much grunt 400s can make.
Top
Post Reply

Return to “Honda - Workshop”