Hey guys just having a little trouble getting my nc35 cranking over.
Spark plugs are good, leads are good, regulator rectifire is good and there is fuel going through the filter but is only half full.
And more suggestions?
Rvf400 turning over but not starting
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
breedy
- One Hit Wonder
- Posts: 1
- Joined: Thu Jun 19, 2014 12:47 am
-
Morespeedvicar
- Site Supporter
- Posts: 837
- Joined: Thu May 01, 2008 1:37 am
- Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
- Location: Grimsby
Re: Rvf400 turning over but not starting
I'm guessing it wont fire but turns over? Try putting a few drops of petrol of carb cleaner down each carb inlet and see what happens. But I'd be guessing your spark plugs may need drying out on a cooker or with a blow torch.
Cheers
Ian
Cheers
Ian