My nc23 has started leaking coolant out of the little hole next to the water pump.
I replaced both seals you can, the one inside the over and the smaller on on the shaft.
But it is still leaking. I hear there in 2 more seals inside the water pump and if they go, its time to replace it.
anyone got any idea where to buy one from??? or any other info will be great
NC23 TRI ARM - WATERPUMP PROBLEM
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
anthonymeikle
- Settled in member
- Posts: 9
- Joined: Tue Aug 13, 2013 10:12 pm
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC23 TRI ARM - WATERPUMP PROBLEM
This is the V4 secion.
The telltale hole means the non-replaceable seal has failed and as you have correctly identified you need a new pump. Perhaps a decent second hand one will be ok.
The waterpump is now discontinued and no longer made by Honda, not sure any other companies make one.
19200kt8000 is the origianl part number.
You can also remove the waterpump, blank it off and fit an electric waterpump if you cant get a decent waterpump secondhand.
The telltale hole means the non-replaceable seal has failed and as you have correctly identified you need a new pump. Perhaps a decent second hand one will be ok.
The waterpump is now discontinued and no longer made by Honda, not sure any other companies make one.
19200kt8000 is the origianl part number.
You can also remove the waterpump, blank it off and fit an electric waterpump if you cant get a decent waterpump secondhand.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...