could anyone tell me the thread size of the rear manifold nuts as mine are rusted to hell and no where has new ones managed to order a brand new set studs and nuts for the front cylinders.
Kennon
Rear manifold nut thread size
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
KennonNC29
- Settled in member
- Posts: 115
- Joined: Tue Feb 21, 2012 1:39 pm
- Bike owned: NC30
- Location: Oxford, Peterborough, new territories Hong Kong
-
speedy231278
- NWAA Supporter
- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Re: Rear manifold nut thread size
It's an 8mm flange nut according to the fiche. 90301-MR8-000. Somewhat oddly, DSS say it's a 5-7 day wait for an order, but their description has the '!D' tag on it, which means Honda have discontinued it. Perhaps this just means the Honda still have some stock of them....
-
KennonNC29
- Settled in member
- Posts: 115
- Joined: Tue Feb 21, 2012 1:39 pm
- Bike owned: NC30
- Location: Oxford, Peterborough, new territories Hong Kong
Re: Rear manifold nut thread size
think I'll just replace them with SS ones the ones that were on the bike had rotted so much that one had to have a 11mm socket forced onto it to get it to turn, I called DSS they could only order in 2 for me, I ordered the front studs and nuts but with two studs still stuck in will have to get them drilled out and carefully check the thread, I've got a titanium threaded bar and SS nuts to make studs for the bike thanks the Simon RC51 for those.