KentCams and valve clearance.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
PARUS
Senior Member
Posts: 1160
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Contact PARUS

KentCams and valve clearance.

Post by PARUS » Thu May 30, 2013 11:33 pm

I have race engine with KentCams installed. I currenly realized that 2,3 cylinders has some issue you can see on the video below. Not defenitelly sure this is valve clearance issue. I have measured all and as I see I have problem only with 3 Exhaust all other within tolerances.

Here is valve clearance check:
Image


And here is video: http://www.youtube.com/watch?v=EIxGbLC5 ... e=youtu.be

[youtube]http://www.youtube.com/watch?v=EIxGbLC5 ... e=youtu.be[/youtube]
Top
PARUS
Senior Member
Posts: 1160
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Contact PARUS

Re: KentCams and valve clearance.

Post by PARUS » Tue Jun 04, 2013 9:52 pm

So, does anyone have idea ?
Top
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: KentCams and valve clearance.

Post by CMSMJ1 » Tue Jun 04, 2013 10:26 pm

Not really mater - but I would be more worried by the tight exhaust clearances on cyl 3 if anything.

get them swapped for the looser clearances in cyls 1 and 2.
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Top
Post Reply

Return to “Honda - Workshop”