Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
carpman
- NWAA Supporter

- Posts: 181
- Joined: Sat Jul 17, 2010 9:18 pm
- Bike owned: 1990 nc30
- Location: Se London
Post
by carpman » Tue May 07, 2013 2:09 pm
Over the last few days i have been overhauling my brake calipers. I want to replace the nipples but i cant find them anywhere (David silvers, Wemoto, M and P,) i have even used google images and looked at thousands but cant find anything that looks like them. All the ones i have seen don't have the seal or recess into the caliper.
Has anyone got a part number that i could do a search on ?

-
speedy231278
- NWAA Supporter

- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Post
by speedy231278 » Tue May 07, 2013 2:28 pm
According to the fiche:
Nipple 43352-mg9-006
O-ring 91355-mg9-006
£2.47 and £2.40 respectively, ex-VAT, from DSS, 5-7 day anticipated lead time.
-
alexandervf
- Settled in member
- Posts: 109
- Joined: Mon Jul 06, 2009 3:08 pm
- Bike owned: NC35
- Location: Greece
Post
by alexandervf » Tue May 07, 2013 2:30 pm
-
speedy231278
- NWAA Supporter

- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Post
by speedy231278 » Tue May 07, 2013 2:41 pm
I don't know if RVF ones are compatible or not - they don't have an o-ring. Anyone know the significance?
-
gavins
- Site Supporter

- Posts: 133
- Joined: Tue Feb 16, 2010 1:45 pm
- Bike owned: NC30, ER6f, K5 750
- Location: Worthing, West Sussex
Post
by gavins » Tue May 07, 2013 2:58 pm
I may be incorrect but i believe the RVF nipples come with/should be used with a thread sealing compound, instead of using an o-ring, to seal the nipple and prevent air from getting in through the thread when bleeding.
-
alexandervf
- Settled in member
- Posts: 109
- Joined: Mon Jul 06, 2009 3:08 pm
- Bike owned: NC35
- Location: Greece
Post
by alexandervf » Tue May 07, 2013 3:05 pm
I'm a bit confused with the calipers....(not the color of the calipers).
They look like rvf calipers, do not think though they are vfr ones....the bleed nip is definitely not an rvf one.
Maybe the calipers are from another model?????
Someone with vfr calipers can recognize them....
-
gavins
- Site Supporter

- Posts: 133
- Joined: Tue Feb 16, 2010 1:45 pm
- Bike owned: NC30, ER6f, K5 750
- Location: Worthing, West Sussex
Post
by gavins » Tue May 07, 2013 3:18 pm
Pretty sure the front half is just a repsprayed NC30 caliper, note the lack of thread in the mounting holes. The bleed nipples are distinctively NC30.
The back half does look mismatched however.....what are the chances that someone has reassembled a half NC30/half NC35 caliper? hard to tell for sure from a photo, could just be the angle.
Not sure how they would match up and the NC35 caliper has a different size small piston.
-
speedy231278
- NWAA Supporter

- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Post
by speedy231278 » Tue May 07, 2013 3:28 pm
Neither side is off of a 35, the shape is wrong. The body is angular in places around the piston housing, whereas the 30 calipers are rounded save for where the two meet.

-
carpman
- NWAA Supporter

- Posts: 181
- Joined: Sat Jul 17, 2010 9:18 pm
- Bike owned: 1990 nc30
- Location: Se London
Post
by carpman » Tue May 07, 2013 3:53 pm
Thanks guys I spoke with David silvers and nipples and o rings now ordered had a chat with them about o-rings and the recess on the nipples, they have literally just been repainted but original colour was a bronze / gold, these are what came with the bike and I assume they are they originals.
-
alexandervf
- Settled in member
- Posts: 109
- Joined: Mon Jul 06, 2009 3:08 pm
- Bike owned: NC35
- Location: Greece
Post
by alexandervf » Tue May 07, 2013 3:56 pm
Yes, good point speedy, thought so too. I was mislead by the shape.
What are they nc30 ones? Cbr 400 is what comes to my mind right now.