I have taken my carbs off to give them a good clean and found the restrictors are still in the inlets. Rather than remove them , I am looking to replace them with new as the rubber has gone very hard.
Can I replace them with the previous years models without the restrictors, or do I have to buy the same and remove the restrictors? is there any difference in size?
Type R carb rubbers
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Noodles
- Settled in member
- Posts: 31
- Joined: Wed Jul 11, 2012 8:47 pm
- Bike owned: GSXR1000K3 NSR125 CBR400NC29
- Location: Nr Hull
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: Type R carb rubbers
Hi, buy whichever is easier, the R models marked 94 and as long as the restricters are the 53bhp variety you can just pull them out with pliers and they will be the same as earlier rubbers. I would advise against the ebay Chinese copies as I bought some and they would not fit. search my early posts for chinese parts reviews.