Hi all

So could someone please explain how many I would need to buy per wheel, what type is best (does it matter?) and if front and back wheel bearings are different?

Thanks everyone
Kev

I prefer oem but others use aftermarket ok. You will need 2 per wheel and they all have the same part number so guess front and back are the same..

91054MN8741 thats the NSK number, used by Honda

I cant link to the David Silver page for some reason but try there or Graeme France racing.

Thank you for the info

GF racing has two types listed on the parts list so a little unclear?

Thank you for the part number tho.

Kev

The actual NC29 wheel bearings are all the same ... the 2nd one listed is for the sprocket carrier.

For the wheels only - you require 4 of these:

http://gfracinguk.com/wheel-bearing-6004-ddu-p-389.html

Top quality Japanese bearings as used in our Championship Winning NC29s.

Hope that helps

Cheers

Thank you GF for the info...if I'm replacing the wheel bearings is it a good time to replace the sprocket carrier? I've never really heard of this part being replaced.

Thanks again
Kev

Also if I did want to replace the sprocket bearing - how many would I need? Thanks

Just the one bearing in the sprocket carrier ... I would replace it ... seen these wear out / fail many many times.

Cheers