Hi folks
Just wanted a quick check, the emulsion tubes with 4 holes go to the front while those with 5 holes go to the rear?
I'm asking cos I just stripped set of carbs that I'm hoping to use on my bike & they were the other way around.
Mind you, they also had both left hand main jets at 115 & both right hand at 118. Logical...
Thanks as always
Vic
Nc30 carbs - emulsion tubes
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
vic-vtrvfr
- Site Supporter
- Posts: 351
- Joined: Tue Feb 14, 2012 9:12 pm
- Bike owned: NC30 x4, VTR1000 Firestorm
- Location: Co Down
-
speedy231278
- NWAA Supporter
- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Re: Nc30 carbs - emulsion tubes
Yup, 4 front, 5 rear. Now, as for where the bigger jets go, well that depends on whether you read the Honda parts diagram or go by whatever everyone else on here does... I'm glad the 35 uses the same size all round... lol
-
vic-vtrvfr
- Site Supporter
- Posts: 351
- Joined: Tue Feb 14, 2012 9:12 pm
- Bike owned: NC30 x4, VTR1000 Firestorm
- Location: Co Down
Re: Nc30 carbs - emulsion tubes
Cheers for that. I'm happy enough that the 115 should be at the fronts, 118 at rear.
Whoever built these before must've got a bit confused :)
Whoever built these before must've got a bit confused :)