Hi my exhaust is blowing a bit and was informed it isn't worth tryin a weld, does anyone know any cheap websites where I can find one? I already have a micron end can so just the bits leading to it?
Any help would be appreciated
Luke
Full exhaust system nc21
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Full exhaust system nc21
Use the search function, this has been covered hundreds of times.
Recently too.
The collectorbox that is blowing is not available from Honda.
To fit a new one requires you to remove the engine, which is another reason these bikes are often sold than fixed.
Maybe you can get a decent second hand one?
An NC24 collector will fit (david silvers do a nice stainless replacmeent for 199+vat) but you will need to change the pipe and can and fit nc24 footrests for it to fit.
Recently too.
The collectorbox that is blowing is not available from Honda.
To fit a new one requires you to remove the engine, which is another reason these bikes are often sold than fixed.
Maybe you can get a decent second hand one?
An NC24 collector will fit (david silvers do a nice stainless replacmeent for 199+vat) but you will need to change the pipe and can and fit nc24 footrests for it to fit.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...