NC30 Carb removal tips?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
iArGod
Settled in member
Posts: 70
Joined: Wed Feb 23, 2011 1:21 pm
Bike owned: NC30
Location: Devon

NC30 Carb removal tips?

Post by iArGod » Mon Sep 10, 2012 6:54 pm

Its been removed before tapping it up with a block of wood and a mallet, but doesnt seem to be doing the trick this time? :(
Cables are detached and grips loosened right up, wd40'd it as much as possible..

Any further tips?
Top
User avatar
Hadies
Site Supporter
Site Supporter
Posts: 606
Joined: Tue Mar 16, 2010 1:20 am
Bike owned: NSR125, NC30, Daytona 675
Location: Washington, Tyne and Wear

Re: NC30 Carb removal tips?

Post by Hadies » Mon Sep 10, 2012 9:22 pm

Wedge a piece of wood in between the rear of the carb and engine and lever it off. Should pop off easy with good leverage.
Top
User avatar
thunderace
Site Supporter
Site Supporter
Posts: 1584
Joined: Fri Sep 10, 2010 9:03 pm
Bike owned: R6, YZF600R
Location: Blackburn, Lancs.

Re: NC30 Carb removal tips?

Post by thunderace » Tue Sep 11, 2012 6:15 am

First time I've known anyone to have trouble getting the carbs OFF! :lol:
Conventional wisdom says to know your limits. To know your limits you need to find them first. Finding your limits generally involves getting in over your head and hoping you live long enough to benefit from the experience. That's the fun part.
Top
iArGod
Settled in member
Posts: 70
Joined: Wed Feb 23, 2011 1:21 pm
Bike owned: NC30
Location: Devon

Re: NC30 Carb removal tips?

Post by iArGod » Tue Sep 11, 2012 7:40 pm

I must be an ultimate spanner, the wood worked a treat thanks again!
Top
Post Reply

Return to “Honda - Workshop”