stupid trim clips

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
scottser32
Settled in member
Posts: 61
Joined: Thu Jan 05, 2012 11:50 pm

stupid trim clips

Post by scottser32 » Mon Aug 27, 2012 3:15 pm

lads can ya tell me how to remove those stupid trim clips, paticularly the big one that holds the front farings and the upper side fairings together behind the lights/under the handle bars. thanks

User avatar
Davez29
Site Supporter
Site Supporter
Posts: 1268
Joined: Sun Aug 03, 2008 8:38 pm
Bike owned: NC29 forever

Re: stupid trim clips

Post by Davez29 » Mon Aug 27, 2012 4:38 pm

A small screwdrivet should work. Usually if the heads round off so a jewellers type tween the screw and clip part should prise it up enough to start twisting it out. Buy some new ones and take care with them while screwing them in. Most of the time they might just push in with a final twist to tighten. Find em on ebay, DS etc.. Your local car shop may have them.

This is assuming you have original type to begin with. Note you said the big ones.. They should be all the same type.

scottser32
Settled in member
Posts: 61
Joined: Thu Jan 05, 2012 11:50 pm

Re: stupid trim clips

Post by scottser32 » Mon Aug 27, 2012 10:50 pm

ok thanks ill just rip it out without doing as much damage as possible :pray:
thanks for the reply

Post Reply