Right it seems that all my pilot screws have been broken off so there's no screw head to undo them, does any body know how I can get them out and where i can get some replacements along with the fuel filter inside the tank that goes over the fuel tap?
Regards Matt
Pilot Screw Problem
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Willcox
- Settled in member
- Posts: 22
- Joined: Mon Sep 05, 2011 9:53 pm
- Bike owned: 1989 NC23
-
RyanNC23
- Settled in member
- Posts: 16
- Joined: Sat Jul 28, 2012 7:22 pm
Re: Pilot Screw Problem
Id be tempted to drill them slightly to provide enough of a 'head' to get a screwdriver in, just be careful not to damage the thread of the carbs!
Also for spares I have used www.cmsnl.com as they do pretty much anything, I used them for my tank filter, and other bits. although they are expensive as it from Holland!
or try wemoto, david silver spares, or Greame France
Also for spares I have used www.cmsnl.com as they do pretty much anything, I used them for my tank filter, and other bits. although they are expensive as it from Holland!
or try wemoto, david silver spares, or Greame France