NC29 clutch change- tips?

leopard_pagan · Post by **leopard_pagan** » Tue Jul 31, 2012 5:15 pm

ok so i now have:
clutch basket:- reason i am changing all this..
friction plates
steel spacer plates
springs:- heavy duty which i did NOT want this time! but seems you have no choice in that!
clutch cover gasket
new clutch nut...
& manual!

borrowing a mates clutch Y tool.. home made & i bent it last time working on my van! so dubious it will be of use this time!

sooo any tips before i get this lot stripped?

Am also replacing my header gaskets while i am at it.. & oiling the choke cable.. so a few things which will take a day ... or rather i am taking my time, so allocating a day...

Post by **tanuki** » Tue Jul 31, 2012 9:56 pm

Good luck getting the center clutch nut off without either the right tool to hold the basket and a second person to undo the nut with a fuck off breaker bar or a compressor/electric impact driver.

leopard_pagan · Post by **leopard_pagan** » Tue Jul 31, 2012 11:25 pm

Breaker bar:-can borrow mates
2nd bod:-hmmm... Time to call in a favor or two

Assuming I also need a tourqe bar to do the clutch but up with?

I can check if the tool will work/fit as got the hybrids old seazed engine sat in the shed with no clutch cover on it....

Pleiades · Post by **Pleiades** » Thu Aug 02, 2012 1:35 pm

We busted my clutch basket when trying with a homemade tool. Used a rattle gun to get it undone and done back up, easy peasey.

leopard_pagan · Post by **leopard_pagan** » Thu Aug 02, 2012 6:56 pm

rattle gun = pneumatic thing.. which i do not even own.. nor does my mate.. so back to the breaker bar/clutch tool

Post by **tanuki** » Thu Aug 02, 2012 11:31 pm

You can hire one for not a lot of money but knowing you being the right arse that you are you will just wade on in lol

Do t say you weren't warned.

Pleiades · Post by **Pleiades** » Sun Aug 05, 2012 3:02 am

leopard_pagan wrote:rattle gun = pneumatic thing..

Not necessarily. You can buy battery operated rattle guns - greggo has one, works a treat. Good for getting the front sprocket off as well. Bit spenny, though...

Post by **tanuki** » Sun Aug 05, 2012 4:14 pm

Pleiades wrote:
leopard_pagan wrote:rattle gun = pneumatic thing..
Not necessarily. You can buy battery operated rattle guns - greggo has one, works a treat. Good for getting the front sprocket off as well. Bit spenny, though...

That's what I meant by hire one....I have one it's awesome.

leopard_pagan · Post by **leopard_pagan** » Sun Aug 05, 2012 10:46 pm

never been a fan of them tbh.. i hate it when anyone uses one on my bike.. to the extreme that i actually ask them NOT to tighten certain nuts/bolts & that i will do it instead.
if i can do up a nut/bolt.. i can undo it. yes i do use torque settings/tools on integral stuff.. as i would on this "elusive" nut.. but i am confident a breaker bar, a 2nd pair of hands & clutch tool* will be fine.

*got one in the post.

dunkenb · Post by **dunkenb** » Sun Aug 05, 2012 11:10 pm

Got mine off by sticking it in gear and holding the back brake on with grips. Came off easy with a long handled socket wrench

NC29 clutch change- tips?

NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?

Re: NC29 clutch change- tips?