As above, when i turn the bikes ignition to on, the tempreture immediately jumps past hot on the needle, it maxes out, none of my instrument lights are working (neutral, turn, etc....), however main head light works fine. Not messed about with any of the wires at all?
Any ideas? I've checked fuses, all ok
Rev counter, all lights stopped working, tempreture on MAX?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 21
- Joined: Sat Dec 03, 2011 3:51 pm
- Bike owned: NC29 x 2
-
- Site Supporter
- Posts: 139
- Joined: Thu Nov 24, 2011 9:15 pm
- Bike owned: RVF400 RGV250
- Location: Shropshire
- Contact:
Re: Rev counter, all lights stopped working, tempreture on M
Sounds like a short somewhere. Could have rubbed through the plastic covering or melted on the rad etc.
-
- Site Supporter
- Posts: 350
- Joined: Tue Apr 08, 2008 8:52 am
Re: Rev counter, all lights stopped working, tempreture on M
Main earth fixing on reg. unit (23) or seat bracket (NC29) is what I would check first ......
Graeme France - GF Racing UK
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com