Ok, so after sorting our the erratic RPM reading on the dash. Just want to know, what the consensus is on RPMs when the bike is started on full choke and choke-free idle? Referring to the RVF here...not sure if it's the same on the VFR also.
If I remember correctly my previous VFR would idle at around 3000 on full choke and around 1200-1300 when the choke was shut off...would this be the same range for the RVF?
Cheers,
Ron
Full Choke and Choke-free Idle RPMs - RVF
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ludacris
- Settled in member
- Posts: 244
- Joined: Fri Sep 17, 2010 1:06 pm
- Bike owned: NC35
- Location: Australia
-
aragami
- Settled in member
- Posts: 31
- Joined: Sat Aug 13, 2011 11:00 am
- Bike owned: RVF400
- Location: Darwin - Australia
Re: Full Choke and Choke-free Idle RPMs - RVF
From what I've been told, idle is between 1000-1500 (usually sitting at 1300ish) and full choke is around 3000 (Don't quote me on that though, I'll have to check.)
Either way, that's what I've got my bike set to and it seems to be going ok!
Either way, that's what I've got my bike set to and it seems to be going ok!
-
Concrete Jungle
- Site Supporter
- Posts: 33
- Joined: Tue Mar 22, 2011 5:18 pm
- Bike owned: NC 35
- Location: Lancashire
Re: Full Choke and Choke-free Idle RPMs - RVF
Full choke is about 4k on mine. Idle is somewhere between 1300 - 1500 as my adjuster screw has a habit of moving while riding. 