where do you get slider pin grease
will lm grease be okay am rebuilding rear calipers
cheers

cheers just ordered some

don't use that for sliders.

Use it on pistons and rubber seals to help locate them.

It's good stuff and I always use it on pistons etc but it's vegetable oil based, will melt too easily.

http://www.ebay.co.uk/itm/Silicone-grea ... 48435811be

Some high temp silicone grease is rubber safe. The stuff Honda use is oranage I believe.

Make sure to flush all the old grease out first, if the rubber seals are swollen from previous grease or cleaning sprays then replace them

Correct! Red rubber grease is however perfect for carb diaphragms