As my bikes off tne road now I thought I would renew the clutch plates, although they dont give problems its just a precaution. Now looking on ebay theres a few different prices and most seem to say they are sending loose plates as needed. So that to me says the are just bulk selling possibly from the same source, so maybe no point spending more on unknown plates if they are all the same.
Can anyone recommend a good seller who's plates are not cheapo crap as I only want to put decent plates in?
Is it worth uprating to heavier springs as mine dont seem bad?
Clutch Plates recomendation
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
-
CMSMJ1
- Moderators
- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: Clutch Plates recomendation
Plates wise.. stay away from Kyoto. I had some, cheap, in the NC30 and they were shite.
I use the EBC Kevlar plates now..they are very good.
I use the EBC Kevlar plates now..they are very good.
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: Clutch Plates recomendation
Ok, thanks for the info.. I have been looking at a EBC SRK049 kit with springs, might go for that.
-
doug
- Settled in member
- Posts: 14
- Joined: Fri Feb 12, 2010 4:20 pm
Re: Clutch Plates recomendation
Hi guys
On a slightly different note, does anyone know where to get aluminium clutch plates from? I saw them on the durbahn website and thought they were a good idea for a track bike:
- less rotating mass
- better acceleration
Has anyone used them or know where to get them?
Cheers,
Doug
On a slightly different note, does anyone know where to get aluminium clutch plates from? I saw them on the durbahn website and thought they were a good idea for a track bike:
- less rotating mass
- better acceleration
Has anyone used them or know where to get them?
Cheers,
Doug