upgrading a jap nc30,s headlamps

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
leerc
Settled in member
Posts: 129
Joined: Wed Nov 09, 2011 12:15 pm

upgrading a jap nc30,s headlamps

Post by leerc » Wed Nov 09, 2011 12:36 pm

ive just bought a nc30 vfr400 and the lights are crap,even high beam isnt that bright

ive been doing a bit of digging around and found a bitt conflicting info,now i think i have it sussed but wanted to confirm before i go ahead

is it a case of fitting a relay as per the thread below

http://www.vsource.org/VFR-RVF_files/NC ... mRelay.htm

and fitting these bulbs

http://www.ebay.co.uk/itm/HQ-HONDA-VFR- ... 1973767879

or is there more to it than im lead to believe

thanks in advance

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: upgrading a jap nc30,s headlamps

Post by Neosophist » Wed Nov 09, 2011 1:34 pm

The high beam will be no brighter, unless your current bulbs are knackered. (Are you headlights clean an aimed properly)

Check what bulbs are in it first. They will be marked.

35/60w are H4R (Japanese spec bulbs)

55/60w are H4 UK spec bulbs.

All you need to do is fit a relay as described then either mod the bulb or the headlight to make it fit in.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

User avatar
Deviant400
Site Supporter
Site Supporter
Posts: 769
Joined: Sat Sep 05, 2009 12:50 pm
Bike owned: NC30, Kona Cowan
Location: Trowbridge

Re: upgrading a jap nc30,s headlamps

Post by Deviant400 » Wed Nov 09, 2011 4:11 pm

hi neo you might have the answer for this one , im running a suzuka front end so one headlight is removed , my question is would i be ok to run a uk spec bulb without the relay mod as im only running 1 llight and not 2 so in theory 2 jap 35w bulbs omitted for 1 uk 55w bulb, im thinking this would not fry the switchgear as its under the 70w to run a pair of jap specs , (does this make sense )
xivlia wrote:no i am not dead. ive just been trying a few things....
Deviants AM/PM build
viewtopic.php?f=62&t=27307

leerc
Settled in member
Posts: 129
Joined: Wed Nov 09, 2011 12:15 pm

Re: upgrading a jap nc30,s headlamps

Post by leerc » Wed Nov 09, 2011 5:28 pm

cheers ill get a look at them tomorrow and confirm which bulbs i have

User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: upgrading a jap nc30,s headlamps

Post by CMSMJ1 » Wed Nov 09, 2011 5:42 pm

Deviant400 wrote:hi neo you might have the answer for this one , im running a suzuka front end so one headlight is removed , my question is would i be ok to run a uk spec bulb without the relay mod as im only running 1 llight and not 2 so in theory 2 jap 35w bulbs omitted for 1 uk 55w bulb, im thinking this would not fry the switchgear as its under the 70w to run a pair of jap specs , (does this make sense )

I've ran a single headlight for 6 years and not melted my switchgear...

I also used to run PIAA super bright lamps..but that died.

I now run Jap lamps..so it doesn't quite answer it..though basically for a long time I ran overpowered lamps in my bike on single headlight and it was bob on.
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

leerc
Settled in member
Posts: 129
Joined: Wed Nov 09, 2011 12:15 pm

Re: upgrading a jap nc30,s headlamps

Post by leerc » Wed Nov 09, 2011 7:25 pm

i only have one high beam light on mine,am i right in thinking it should have 2?

i have 2 ridiculously dim low beams tho

User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: upgrading a jap nc30,s headlamps

Post by CMSMJ1 » Wed Nov 09, 2011 7:28 pm

Both should have a high beam...so you have a duff lamp in there.

The low beams are dim @ std jap spec
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

magg
Senior Member
Posts: 1914
Joined: Mon Sep 20, 2010 11:55 pm
Bike owned: VFR400
Location: Blue Mountain NSW Australia

Re: upgrading a jap nc30,s headlamps

Post by magg » Wed Nov 09, 2011 8:53 pm

Deviant400 you are correct, provided the wattage of your single headlamp is less than that of the OEM twin setup the switch gear will be ok.

leerc
Settled in member
Posts: 129
Joined: Wed Nov 09, 2011 12:15 pm

Re: upgrading a jap nc30,s headlamps

Post by leerc » Thu Nov 10, 2011 9:42 am

excellent so i may not need to upgrade after all,i probably will tho lights are one thing i like to be as good as possible

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: upgrading a jap nc30,s headlamps

Post by Neosophist » Thu Nov 10, 2011 10:00 am

leerc wrote:excellent so i may not need to upgrade after all,i probably will tho lights are one thing i like to be as good as possible
Philips Xtreeme are really AWESOME bulbs.. I can't stress how good they are over standard bulbs (which is why they always win What Car bulb of the year.

They do H4 55/60 watt and a larger watt for 'race' use.

However, the race-use are not UV coated so might burn your headlamps but are really bright... the standard H4's are great.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

Post Reply