Page 1 of 1

Newbie in west sussex

Posted: Mon Aug 08, 2011 8:30 pm
by scooble
Hello to all.
Just bought an NC30 tonight and noticed that when I turn the ignition on, the fan comes on and the temo goes to max even when the engine is cold.
I removed the fairing and noticed a sensor on the lower rad on the left hand side that wasn't connected and a wire junction box that has a blade fuse 'bodged' across the terminals.
I'm assuming that the junction box should plug into the sensor on the rad, but someone has bypassed this - am I correct?

Also, does anyone have a PDF of the nc30 manual.

Many thanks,

Tricia

Re: Newbie in west sussex

Posted: Mon Aug 08, 2011 8:41 pm
by CRM
hi, moving this to the correct section where you are more likely to get a responce
manuals on the homepage

Re: Newbie in west sussex

Posted: Mon Aug 08, 2011 8:46 pm
by scooble
Is this the home page;
index.php

I did a search (Ctrl F) on that page for manual, but couldn't find anything. Please can you point me in the right direction.

Re: Newbie in west sussex

Posted: Mon Aug 08, 2011 9:33 pm
by CRM
http://www.400greybike.com
and document library. this forum is a section of the main site ;-)