Shock Rebuild

earthbound14 · Post by **earthbound14** » Sat Apr 23, 2011 3:55 am

Just wondering if anyone has rebuilt their Showa rear shocks. My mates CB has sprung a leak. I can't seem to find anything telling you how to replace the seals in the Showa shocks.

amorti · Post by **amorti** » Sat Apr 23, 2011 8:21 am

earthbound14 wrote:Just wondering if anyone has rebuilt their Showa rear shocks. My mates CB has sprung a leak. I can't seem to find anything telling you how to replace the seals in the Showa shocks.

The shock contains highly pressurised nitrogen gas. It's not a home mechanic job to rebuild them.

4-cyl · Post by **4-cyl** » Sat Apr 23, 2011 9:51 am

amorti wrote:
earthbound14 wrote:Just wondering if anyone has rebuilt their Showa rear shocks. My mates CB has sprung a leak. I can't seem to find anything telling you how to replace the seals in the Showa shocks.
The shock contains highly pressurised nitrogen gas. It's not a home mechanic job to rebuild them.

Sure, you can rebuild them. I too have been looking for a rebuild kit. Google "Showa rebuild," and you will come up with plenty of how-to's (though maybe not specifically for a 400SF).

And yes, there is nitrogen gas inside, but there is also a valve for releasing the gas. Take care when you're removing the shock valves to cover your eyes since some of the oil is still going to burst out. Once you rebuild the shocks, take them to a shop and have them pressurize them again with nitrogen--just like a car tire. Hell, some shocks even have a schrader valve.

earthbound14 · Post by **earthbound14** » Mon Apr 25, 2011 1:41 am

Thanks,

I'll have to look into this. There must be something on Youtube.

Shock Rebuild

Shock Rebuild

Re: Shock Rebuild

Re: Shock Rebuild

Re: Shock Rebuild