Anyone know where I can get the bearing,bushing and seals to replace the rubber mounted bushing on the NC30 unit.
I've been using the NC30 linkage and it's only now when was removing the shock, I noticed how restrictive it is.
Way back, I modified the NC35 linkage to take an RS250 shock and then bought a proper shock.
Doh.
NC35 shock linkage
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Indiana Jones
- Site Supporter
- Posts: 141
- Joined: Mon Jul 20, 2009 8:48 am
- Bike owned: XT600Z,'10 TE250 ,XS650 chop
- Location: Faugheen
- Contact:
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
-
tanto
- Site Supporter
- Posts: 218
- Joined: Sat Oct 09, 2010 1:15 am
- Bike owned: NC30, Raleigh Chopper
- Location: Back in the UK.
Re: NC35 shock linkage
The parts numbers are:
For good photos of the mod. see: Rocker Arm Needle Race Mod
- 91071-MY1-005 - Needle Race (17×24×17)
- 52465-MY1-000 - Pivot Pin
- 91262-KV3-831 - Dust Seal (17×24×5) x2
For good photos of the mod. see: Rocker Arm Needle Race Mod
"A slipping gear could let your M203 grenade launcher fire when you least expect it. That would make you quite unpopular in what's left of your unit." - US Army manual of preventive maintenance.
-
banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
Re: NC35 shock linkage
Cammo wrote:Rick Oliver stocks them.
attention 2 detail - bike valeting and more
-
Indiana Jones
- Site Supporter
- Posts: 141
- Joined: Mon Jul 20, 2009 8:48 am
- Bike owned: XT600Z,'10 TE250 ,XS650 chop
- Location: Faugheen
- Contact:
Re: NC35 shock linkage
Cheers guys.