Re: NC23E engine in NC31
Posted: Tue Jan 11, 2011 11:58 pm
hi everyone
i'm from Russia, and i want to say, that manual had some mistakes. be careful
i'm from Russia, and i want to say, that manual had some mistakes. be careful
http://www.400greybike.com/forum/
NC23E engine in NC31
Page 2 of 2
Re: NC23E engine in NC31
Posted: Fri Jul 14, 2017 6:53 pm
Sorry my 6th gear jumps!!! can I put this http://www.ebay.co.uk/itm/HONDA-CB1-CB4 ... SwKtlWjWMz into my bike nc31 L reg ?
Re: NC23E engine in NC31
Posted: Sat Jul 15, 2017 8:03 am
Digitaly, could you be more specific with the gear issue?
I have the vtec spec 2 and I have a gearbox issue similar, 6th gear jumping... I am planning to have it repaired instead of replaced as vtec 2 engines aren't that common second hand
Sent from my E6653 using Tapatalk
I have the vtec spec 2 and I have a gearbox issue similar, 6th gear jumping... I am planning to have it repaired instead of replaced as vtec 2 engines aren't that common second hand
Sent from my E6653 using Tapatalk
Re: NC23E engine in NC31
Posted: Thu Nov 02, 2017 6:47 am
NC31 is more thin than NC23E about 20mm. Because of different cam gear drive mechanism. I thought about swapping but now tuning NC31 engine - it's easier. Also it has different mount angle. The frame will have to be rewelded